Author Topic: Zotac BI323 AROS boot fails using Sandisk Cruzer Blade 16GB  (Read 255 times)

StefaanC

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
Zotac BI323 AROS boot fails using Sandisk Cruzer Blade 16GB
« on: February 10, 2019, 07:43:18 PM »
Linux and windows no problems but AROS simply does not boot.
Not in USB3, not in USB2 and legacy support is enabled in the BIOS, but switched off doesn't help either.
Intel Celeron N3150 Quad 1,6Ghz till 2,08Ghz
8GB DDR3L ram
Video Intel HD graphics 256MB reserved video DDR3L ram
The system can play 4K 30Hz stable and 1080P 60 Hz
Well with windows at least.
I deleted all partitions on the hard disk so that windows did not boot again.
Latest BIOS : 2K180126
I will reboot now and see if the stick can boot an a Intel I5 system.

StefaanC

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
Re: Zotac BI323 AROS boot fails using Sandisk Cruzer Blade 16GB
« Reply #1 on: February 10, 2019, 08:14:10 PM »
The intel I5 refuses also to boot  from the Sandisk. One booted Linux mint in this case then the contents of the usb stick is visible , stick created with Unetbootin

StefaanC

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
Re: Zotac BI323 AROS boot fails using Sandisk Cruzer Blade 16GB
« Reply #2 on: February 10, 2019, 10:46:32 PM »
Tested on I5 computer wit Linux Mint on and Ryzen Threadripper 1900x with windows on , legacy support on, USB as harddisk and cd-rom tested but still no Aros boot.
Unetbooting on windows and in Lin ux ment both failing, I don't think so, even on Linux Mint I created my Windows 10 USB stick and that booted directly.

Note the bios see's the stick as UEFI boot.

paolone

  • Member
  • ***
  • Posts: 196
  • Karma: +3/-0
Re: Zotac BI323 AROS boot fails using Sandisk Cruzer Blade 16GB
« Reply #3 on: February 11, 2019, 08:41:41 AM »
Are you using unetbootin to create your USB installation media? No wonder it does not work.
There is a procedure to create it and you're not following it. So it won't work.