AROS Exec

Development => AROS Software Development => Topic started by: serk118uk on February 21, 2021, 12:34:59 PM

Title: serk118uk's Native application and ports..
Post by: serk118uk on February 21, 2021, 12:34:59 PM
arSFSDoctor v1 for aros

(https://i.ibb.co/BnJTjc9/icon.jpg)

(https://i.ibb.co/85PXTHW/aem.jpg)

(https://i.ibb.co/qxNzB7h/sfs-btree-structure2.jpg)

I started working on sfsrecovery tool since 2019 just after losing my hard disk.
Goal is to make it look and feel like original SFSDoctor and run on AROS to recover lost/deleted/lost
and corrupted sfs disk/partitions.

Look and Feel it's not same as SFSDoctor yet but i am happy with the current design of arSFSDoctor.



What used and who helped during the build.
-----------------------------------------------------
-Some sourcecode from ASFS linux driver are used.
-Functions from sfscheck.c from aros tree.
-libdiskio/ by Fredrik Wikstrom <fredrik@a500.org>
-Btree build - by Krzysztof Smiechowicz <deadwood@wp.pl>
-some functions are taken from opensource testdisk.
-serk118 classes/mui/zune designe and rest of the implemention <Serk118 <serk118@gmail.com>

-I like to thank John Hendrikx for all the helps/sample codes and directions  - John Hendrikx <hjohn@xs4all.nl>

-LunaPaint used for icon.
-Arzip to archiive.
-Txt2Pdf for pdf.
-gcc compiler.
-JanoEditor.

Buttons and functions
------------------------------

About - Displays about window.

Devices - available sfs drives.(scan & show devices button brings up none sfs drives too).

Chack Disk - same way how sfscheck works on AROS (Need bit more work).

>Scan Disk  - scans for lost/damaged/croupted and deleted files/folders.
>Scan Options - recover and scan methods.
>Quick Scan - Basic valid unbroken structure/admin/container data scan.
>Standard Scan - slighly faster than Deep Scan and yet again effective results.
>Deep Scan - slow but very effective results.
>Listview - shows all the files.
>Select All/Undo Selected - sellect/unselect all files/folders.
>Mark/unmark - Marks and unmark selected files/folders

>Save Log -- saves log file to selected path.
>Clear Log -- clears the log.

>Clone Drive -- clones selected partition drive to image file.
>Clone Drive - generates a temporary TSFS mount file to same directory/device where image file is,
>copy the mount file to devs/dosdrives/ and than you should be able to  mount image file by using system/DiskImageGUI.
>Return to Main -- back to main screen.

>Quit -- exit to AROS dos..



Planned to add more
-------------------------------

--Langauge -- Catalogs(%1 done).
--Advance scan (scan from=xx till=xx , within available partition size range)(%10 done).
--Image scan only..
--Repair partition (%60 done).
--Load/save log file(%20 done).
--Load/save partition metedata(%30 done).
--Sfs structure repair (%10 done).
--Sfs2 implemention(%0 done).
--Optimise read and write methods to gain more speed(direct i/o and cache i/o)(%10 done).
--Clean readme guide in pdf (%5 done).



Example steps
-------------
1.Open arSFSDoctor.
2.Pick a sfs partition from the device list.
3.Scan Disk.
4.Select Deep Scan.
5.Click on Scan Now button
6.select all the files and mark them.
7.Click on Recover Now and select location where you like to save your salved files etc..
8.Return to Main.


please try  with  small sfs drive while testing..any bugs report directly to me at serk118@gmail.com or post here..




Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on February 21, 2021, 12:39:42 PM
SFS is a robust filesystem I also use it on OS3, this tool of yours will make it even more powerful, thanks for doing this !
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on February 21, 2021, 12:45:19 PM
also fakefastmem for aros

copy fakefastmem to c/
and add below lines to user-startup

IF EXISTS c:fakefastmem
run fakefastmem 1024*32
EndIf

Title: Re: serk118uk's Native application and ports..
Post by: OlafS3 on February 21, 2021, 12:51:44 PM
also fakefastmem for aros

copy fakefastmem to c/
and add below lines to user-startup

IF EXISTS c:fakefastmem
run fakefastmem 1024*32
EndIf˙

both for X86? Version also available for Aros 68k?
Title: Re: serk118uk's Native application and ports..
Post by: salvo on February 21, 2021, 12:56:24 PM
thank you serk :D
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on February 21, 2021, 12:58:11 PM
also fakefastmem for aros

copy fakefastmem to c/
and add below lines to user-startup

IF EXISTS c:fakefastmem
run fakefastmem 1024*32
EndIf˙

both for X86? Version also available for Aros 68k?

Atm just x86 , once i finish than i will compile for 68k and x64 too
Title: Re: serk118uk's Native application and ports..
Post by: deadwood on February 21, 2021, 01:11:47 PM
Congratulations on making the release. I'm sure many people will be happy with this tool!
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on February 21, 2021, 01:21:46 PM
Congratulations on making the release. I'm sure many people will be happy with this tool!

i hope you are happy with the graphical changes..
Title: Re: serk118uk's Native application and ports..
Post by: deadwood on February 21, 2021, 01:25:14 PM
Yes, looks good to me. Simple and effective :)
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on February 21, 2021, 01:27:39 PM
Just upload to  aros-archives but i forget to set Category in right place ,

someone/admin please change Category: audio to tools/sfs software i guess or near (sorry)


also

https://sourceforge.net/projects/amigaide/
I also ported amigaIDE but i am stuck at moduler part since we dont have sasC and i am not soo great with gcc in moduler side to amigaIDE.
 
if anyone wants just email me   

Title: Re: serk118uk's Native application and ports..
Post by: salvo on March 09, 2021, 07:55:33 PM
serk framebuild 0.2 works fine 0.3 have a little problem

thanks
Title: Re: serk118uk's Native application and ports..
Post by: magorium on March 09, 2021, 08:12:14 PM
Thank you for your ports serk :thumbsup"

I also ported amigaIDE but i am stuck at moduler part since we dont have sasC and i am not soo great with gcc in moduler side to amigaIDE.
Not that i saying it is easy but have you looked at the 'modules' ? There is a file called compiler which offers support for multiple compilers, including vbcc and gnu.

The accompanied help writes that there are two solutions to the problem and that the one chosen is to create macro's to mimic sasc behaviour for other compilers.

Other than that, it looks like a normal shared library (with some additional initialisation and other specifics) which can also be made with gcc. ALB42 has an example (with makefile) in his github account. We needed to test how this works because of development with Free Pascal.
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on March 10, 2021, 12:24:24 AM
also fakefastmem for aros

copy fakefastmem to c/
and add below lines to user-startup

IF EXISTS c:fakefastmem
run fakefastmem 1024*32
EndIf

I'm sorry but will the obtained fastram be able to be used by any program?
Title: Re: serk118uk's Native application and ports..
Post by: Argo on March 10, 2021, 11:57:15 AM
Wow, Nice
Title: Re: serk118uk's Native application and ports..
Post by: salvo on March 10, 2021, 01:53:18 PM
Talking to FrameBuil V0.3 Wrap the Requester of the files Block the program, for example if I'm loading the files individually and by mistake I press the button to upload entire directories and I cancel to close it all stop :-\
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on March 11, 2021, 09:54:10 AM
@serk118uk

On FrameBuild is it possible to change the fonts or background? the texts in black are not seen well on the blue background.

Also can I create my own Skin (Img) for my AfA One, thanks!
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on March 11, 2021, 06:56:23 PM
Thank you for your ports serk :thumbsup"

I also ported amigaIDE but i am stuck at moduler part since we dont have sasC and i am not soo great with gcc in moduler side to amigaIDE.
Not that i saying it is easy but have you looked at the 'modules' ? There is a file called compiler which offers support for multiple compilers, including vbcc and gnu.

The accompanied help writes that there are two solutions to the problem and that the one chosen is to create macro's to mimic sasc behaviour for other compilers.

Other than that, it looks like a normal shared library (with some additional initialisation and other specifics) which can also be made with gcc. ALB42 has an example (with makefile) in his github account. We needed to test how this works because of development with Free Pascal.

I will check out ALB42"s, thanks
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on March 11, 2021, 07:01:52 PM
@serk118uk

On FrameBuild is it possible to change the fonts or background? the texts in black are not seen well on the blue background.

Also can I create my own Skin (Img) for my AfA One, thanks!

I have the 0.4 version and i will upload to archives.

Also now you can double click in list view window and display images too , you can create icons for it, problem also fixed.

I just have to change background colour and upload to archives..
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on March 11, 2021, 07:08:30 PM
Thanks, i had created this Skin I think also works on v4
Title: Re: serk118uk's Native application and ports..
Post by: magorium on March 11, 2021, 07:15:21 PM
Thank you for your ports serk :thumbsup"

I also ported amigaIDE but i am stuck at moduler part since we dont have sasC and i am not soo great with gcc in moduler side to amigaIDE.
Not that i saying it is easy but have you looked at the 'modules' ? There is a file called compiler which offers support for multiple compilers, including vbcc and gnu.

The accompanied help writes that there are two solutions to the problem and that the one chosen is to create macro's to mimic sasc behaviour for other compilers.

Other than that, it looks like a normal shared library (with some additional initialisation and other specifics) which can also be made with gcc. ALB42 has an example (with makefile) in his github account. We needed to test how this works because of development with Free Pascal.

I will check out ALB42"s, thanks

Hi serk,


Sorry as i forgot to link to the specific repo, which can be found at https://github.com/alb42/AROS-libraries


In particular you could perhaps take a look at https://github.com/alb42/AROS-libraries/tree/master/MyTestLib which has a detailed readme.


Hopefully that is enough information to enable you to continue your porting effort.
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on March 11, 2021, 10:37:36 PM
Thanks, i had created this Skin I think also works on v4

nice..

try new version please..
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on March 11, 2021, 11:08:08 PM
Thank you for your ports serk :thumbsup"

I also ported amigaIDE but i am stuck at moduler part since we dont have sasC and i am not soo great with gcc in moduler side to amigaIDE.
Not that i saying it is easy but have you looked at the 'modules' ? There is a file called compiler which offers support for multiple compilers, including vbcc and gnu.

The accompanied help writes that there are two solutions to the problem and that the one chosen is to create macro's to mimic sasc behaviour for other compilers.

Other than that, it looks like a normal shared library (with some additional initialisation and other specifics) which can also be made with gcc. ALB42 has an example (with makefile) in his github account. We needed to test how this works because of development with Free Pascal.

I will check out ALB42"s, thanks

Hi serk,


Sorry as i forgot to link to the specific repo, which can be found at https://github.com/alb42/AROS-libraries


In particular you could perhaps take a look at https://github.com/alb42/AROS-libraries/tree/master/MyTestLib which has a detailed readme.


Hopefully that is enough information to enable you to continue your porting effort.

Thank you ,
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on March 12, 2021, 12:42:05 AM
Thanks, i had created this Skin I think also works on v4

nice..

try new version please..

v4 works well, only problem is the request, if you move it behind other requests come out, see screenshot

Question, what is the emptyframe image for ? 
Title: Re: serk118uk's Native application and ports..
Post by: salvo on March 12, 2021, 01:15:55 PM
yes work well serk, I don't understand the boxes where it is written empty frame to what they are used and then when I press play from the specific button you don't open the slide
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on March 12, 2021, 04:49:56 PM
hi,

Yes just seen the screenshot , i will fix that soon.

Those boxes meant to be the animation frames but i had no time to work on that, ignore those boxes  and i will work on that when i am done with my other projects,
Title: Re: serk118uk's Native application and ports..
Post by: salvo on March 12, 2021, 06:40:10 PM
ok serk :)
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on March 12, 2021, 11:21:38 PM
hi,

Yes just seen the screenshot , i will fix that soon.

Those boxes meant to be the animation frames but i had no time to work on that, ignore those boxes  and i will work on that when i am done with my other projects,

Same problem Request also with "MP3Player", here there is also another problem, from Tab "load only one mp3" if you try to load the whole folder of mp3 the system crashes.
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on March 13, 2021, 04:18:01 PM
FrameBuild fix attached , please test and report if  more bug found..

I will fix mp3Player too soon..
Title: Re: serk118uk's Native application and ports..
Post by: salvo on March 13, 2021, 07:15:32 PM
Serk does not start the program maybe because the "IMG" directory is missing :-\
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on March 13, 2021, 07:31:09 PM
FrameBuild fix attached , please test and report if  more bug found..

I will fix mp3Player too soon..


Perfect no more problems with the GUI , thanks for the fix,  will check if there are other problems :)

About the EmpyFrame image, what is it for, is it just a message or does it have some function?
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on March 13, 2021, 07:38:09 PM
Serk does not start the program maybe because the "IMG" directory is missing :-\

Yes framebuild needs img/
Title: Re: serk118uk's Native application and ports..
Post by: salvo on March 14, 2021, 11:36:53 AM
ok the program works fine except when you want to view the AVI file created with the appropriate "Play" button MPlayer does not open
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on March 15, 2021, 10:01:25 PM
HI,

I just fixed play function,copy attached file to FrameBuild/ folder..
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on March 16, 2021, 12:47:00 AM
Thanks, it works well for me
Title: Re: serk118uk's Native application and ports..
Post by: salvo on July 02, 2021, 04:33:23 PM
serk arsfsdoctor new icon if you liked
Title: Re: serk118uk's Native application and ports..
Post by: miker1264 on July 02, 2021, 09:39:41 PM
serk arsfsdoctor new icon if you liked

ArSFSDoctor looks like a nice SFS Tool. Very good work.  :)
Title: Re: serk118uk's Native application and ports..
Post by: salvo on July 02, 2021, 11:08:39 PM
yes miker, nice :)
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on July 03, 2021, 03:32:23 AM
serk arsfsdoctor new icon if you liked
Hi salvo,

Icon looks really nice. Great art work..

Thank you..


Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on July 03, 2021, 03:34:21 AM
serk arsfsdoctor new icon if you liked

ArSFSDoctor looks like a nice SFS Tool. Very good work.  :)

I am glad you like it..thank you
Title: Re: serk118uk's Native application and ports..
Post by: salvo on July 03, 2021, 12:44:38 PM
thank you serk :)
Title: Re: serk118uk's Native application and ports..
Post by: salvo on July 04, 2021, 01:16:17 AM
another icon for framebuild if you liked serk
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on July 04, 2021, 01:39:49 PM
another icon for framebuild if you liked serk

Yet again , another great art work, looks clean and sharp
.
Title: Re: serk118uk's Native application and ports..
Post by: salvo on July 04, 2021, 01:59:01 PM
thank you serk :)
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on August 26, 2021, 02:45:02 PM
Hi people, i done bit of work on Framebuild  and back ported PaperBox tool from aminet (uploading into archives)(http://aminet.net/package/gfx/3d/PaperBox)


(https://i.postimg.cc/jq3YbN8b/FB05.jpg)

(https://i.postimg.cc/V6dQrk6T/pb.jpg)
Title: Re: serk118uk's Native application and ports..
Post by: salvo on August 26, 2021, 03:30:57 PM
Great Serk Thank You :)
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on August 26, 2021, 03:50:52 PM
Thank you very much serk, something does not work well for me, the screenshot does not appear in the square on the right, where am I wrong?

Also if I create a video it doesn't work, can it depend on my images that are 1024x768, what are the right Fps values?

Finally, I noticed that if Dopus4 is open, FrameBuild freezes the system.

(https://ae.amigalife.org/index.php?action=dlattach;topic=673.0;attach=1387;image)
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on August 26, 2021, 06:05:33 PM
hi,
see https://en.wikipedia.org/wiki/Frame_rate for the fps usage..

Grab one of the pictures at bottom and  drop that image there..

is it possible to do a little video of the dopus4 crashing or framebuild crashing dopus4..

.
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on August 26, 2021, 06:16:51 PM
I am also working heavly on arSFSDoctor still...
(https://i.postimg.cc/3xnvQKPc/arsfs.png)
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on August 26, 2021, 06:19:15 PM
hi,
see https://en.wikipedia.org/wiki/Frame_rate for the fps usage..

Grab one of the pictures at bottom and  drop that image there..

is it possible to do a little video of the dopus4 crashing or framebuild crashing dopus4..


If I drag the screenshot it works I understood it even if with a delay :)  what I don't understand is what is that square for?

What are the right steps to create a video?

Now I'll try to catch the error with Dopus4, it happened when Dopus was open and at the same time I was loading a directory with images, at the moment is not happening anymore, maybe I had run something that dirtied the RAM, if it happens again I attach screenshots.

Thanks for your help

Thanks also for arSFSDoctor, a very useful tool
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on August 26, 2021, 06:54:32 PM
Quote
what I don't understand is what is that square for?

I dont know what square or where?

read the original readme
http://aminet.net/package/gfx/edit/workframebuild-aros

Add some .jpg images than select / highlight all and set hight/width than set fps=30 for now and hit the build button and play.(if you have not configured play function than goto ram: open saved avi file  to see your video).


BTW I am turning FrameBuild to SoftVideoEditor soon, 0.5 version is just to test if Image classes doing the job or not..

--adding NEW avi finctions  for Framebuild.
--wav/mp3 sound/music support on build.
-internal video player classes.
-video titling,
--will report more  as i add more into it..
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on August 26, 2021, 07:13:26 PM
Old age is an ugly beast, I had really forgotten that it was necessary to highlight the files, now everything works perfectly, I attach a Video that I will use in the News of AROS One.

SoftVideoEditor I think it will be something new and innovative, we look forward to its release, thanks again for what you do for AROS.

Question is there also a version of FrameBuild for AROS 68k?


Here is the video about the new FrameBuild:

https://drive.google.com/file/d/1GIGgSDybEnX4f6SdCLFr25FTrvjMRMhn/view
Title: Re: serk118uk's Native application and ports..
Post by: salvo on August 26, 2021, 07:52:03 PM
Great news Serk!
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on August 28, 2021, 12:20:52 AM
@serk118uk

Nice PaperBox, successfully tested on AROS One x86, I also had fun creating an AROS One PaperBox ;D, see video  at 720p

Very soon I will make a test with the OS3 version on AROS 68k

https://drive.google.com/file/d/1UGQutSJC_S6fsAeExvEMcY6-4pZ80OVH/view
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on August 28, 2021, 04:53:53 PM
I attached aros version..I am not sure how it meant to work but compiled without any problem..
http://aminet.net/package/biz/misc/Banker-0.99a
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on August 28, 2021, 05:05:25 PM
Thanks also for this software, it's almost time to distribute the new version of AROS One x86, by now there are many software updates and news even if these are few, there are also important library updates.
Title: Re: serk118uk's Native application and ports..
Post by: salvo on August 28, 2021, 06:15:04 PM
to me it blocks the system when I try to execute it, if everything works well to you :)
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on August 28, 2021, 07:26:19 PM
@serk
Banker works well on AROS One x86 even if it's not easy to understand the italian catalog is not well translated  ;D

Banker will also be included in the next release of AROS One x86  :D
Title: Re: serk118uk's Native application and ports..
Post by: salvo on August 29, 2021, 12:11:14 PM
Does the Serk banker to you?
Title: Re: serk118uk's Native application and ports..
Post by: salvo on September 06, 2021, 12:13:50 PM
serk

There were no more Muibase updates for Aros, I contacted the author a few years ago, he can't do the port, I attach the source code to see if you can always fill it if you have time or other priorities :)


https://sourceforge.net/projects/muibase/files/muibase-src/MUIbaseSource-4.3.tgz/download
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on September 06, 2021, 04:12:19 PM
serk

There were no more Muibase updates for Aros, I contacted the author a few years ago, he can't do the port, I attach the source code to see if you can always fill it if you have time or other priorities :)


https://sourceforge.net/projects/muibase/files/muibase-src/MUIbaseSource-4.3.tgz/download

I will download but no promise's atm because i am working on multiable projects but i will see if time is on my side..
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on September 06, 2021, 04:16:52 PM
Does the Serk banker to you?

Sorry i missed this, yes it does work with my icaros and arosone x86..
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on September 06, 2021, 04:19:58 PM
Ok right, about Simplemail you continue here
Title: Re: serk118uk's Native application and ports..
Post by: salvo on September 06, 2021, 06:20:34 PM
serk

There were no more Muibase updates for Aros, I contacted the author a few years ago, he can't do the port, I attach the source code to see if you can always fill it if you have time or other priorities :)


https://sourceforge.net/projects/muibase/files/muibase-src/MUIbaseSource-4.3.tgz/download

I will download but no promise's atm because i am working on multiable projects but i will see if time is on my side..

ok serk no problem
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on September 11, 2021, 06:27:49 PM
Another test run , please test with gmail,hotmail,yahoo via imap or pop
https://ufile.io/3a0grvnq

and report back please..
Title: Re: serk118uk's Native application and ports..
Post by: salvo on September 11, 2021, 07:20:15 PM
I tried the program with the email.it provider who does not need a safe connection from the client and I receive the email but then everything crashes and the characters of the emails change, yahoo and gmail that I tried before everyone doesn't work, they have Need a safe connection from the client

(https://i.ibb.co/17SVqjc/mail.jpg) (https://ibb.co/17SVqjc)


Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on September 11, 2021, 08:54:06 PM
Another test run , please test with gmail,hotmail,yahoo via imap or pop
https://ufile.io/3a0grvnq

and report back please..

Now the mail is shown on the right quadrant, the inbox is working perfectly, I have only error in the sent mail.

I don't have any crashes and no problems with text fonts, so I'd say perfect.

If I create a new accounts the system crash (splitting windows) when i "save" the configuration
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on September 11, 2021, 10:48:31 PM
OK reconfigured SimpleMail and now your version 1.1 works perfectly with both inbox and sent mail, no problem with fonts.

There is still the problem that it is not possible to save an account configuration, I have created the new configuration with an old version of SimpleMail
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on September 12, 2021, 11:05:06 AM
I tried the program with the email.it provider who does not need a safe connection from the client and I receive the email but then everything crashes and the characters of the emails change, yahoo and gmail that I tried before everyone doesn't work, they have Need a safe connection from the client

(https://i.ibb.co/17SVqjc/mail.jpg) (https://ibb.co/17SVqjc)

I tried with aros one x86 and latest icaros and runs without crashing characters shown ok..
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on September 12, 2021, 11:18:40 AM
OK reconfigured SimpleMail and now your version 1.1 works perfectly with both inbox and sent mail, no problem with fonts.

There is still the problem that it is not possible to save an account configuration, I have created the new configuration with an old version of SimpleMail

(https://i.postimg.cc/htZLM0Hd/sm.png)

Simplemail refuses to connect if 2-step verification is on on your mail account not because of simplemail, Allow less secure apps to OFF on your mail provider settings and that should build trust between your computer and your email providers and SimpleMail Should work (well i hope)

Check account configuration file protection because i have no problem saving here.

I am trying SimpleMail with gmail,hotmail so i can not access them atm but i am working on that..


there are option in settings to select ssl_v2 or ssl_v3 , please  try them too..
Title: Re: serk118uk's Native application and ports..
Post by: salvo on September 12, 2021, 11:46:42 AM
to me the parameter configuration window is bloked, font errors will investigate
Title: Re: serk118uk's Native application and ports..
Post by: salvo on September 12, 2021, 12:10:02 PM
serk but you have a new version of program
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on September 12, 2021, 12:46:23 PM

I am trying SimpleMail with gmail,hotmail so i can not access them atm but i am working on that..
As I said in my second post, my Sent and incoming work perfectly with "Libero Mail".

Quote
there are option in settings to select ssl_v2 or ssl_v3 , please  try them too..

I didn't select anything, I left "none", I'll try if it works also with ssl_v2 or ssl_v3


N.B. The only thing that doesn't work is create a new account is saving, you can create and save without having a lockout?
Title: Re: serk118uk's Native application and ports..
Post by: salvo on September 12, 2021, 06:46:16 PM
serk I checked the two-factor authentication if it was active on yahoo, but I don't receive anything I deduce that I need to better control the account settings if it worked with the major existing providers it should work too :-\
Title: Re: serk118uk's Native application and ports..
Post by: salvo on September 12, 2021, 06:58:20 PM
ok now the characters see well, but I have problems with yahoo and gmail, with email.it no but the server does not need a secure connection from the client
Title: Re: serk118uk's Native application and ports..
Post by: salvo on September 12, 2021, 07:34:57 PM
ok now I understood if we have no amissl or openssl (it seems to me that simplemail has also been compiled with it but only some versions) we can only access provider where they do not require the ssl connection by the client, libero.it and email.it allow

(https://i.ibb.co/VCPwKfj/email.jpg) (https://ibb.co/VCPwKfj)
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on September 14, 2021, 12:59:49 PM

I am trying SimpleMail with gmail,hotmail so i can not access them atm but i am working on that..
As I said in my second post, my Sent and incoming work perfectly with "Libero Mail".

Quote
there are option in settings to select ssl_v2 or ssl_v3 , please  try them too..

I didn't select anything, I left "none", I'll try if it works also with ssl_v2 or ssl_v3


N.B. The only thing that doesn't work is create a new account is saving, you can create and save without having a lockout?

Hi,

I have 2 aros distros and I am running both on acer aspire one d150 and I tried and on both computers SimpleMail accounts saved with no problem.

You are on aros one x86 right??

Please forward your email to serk118@gmail.com so I can email you my attempts of simplemail directly to you..

Thank you..
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on September 14, 2021, 01:10:59 PM
ok now I understood if we have no amissl or openssl (it seems to me that simplemail has also been compiled with it but only some versions) we can only access provider where they do not require the ssl connection by the client, libero.it and email.it allow

(https://i.ibb.co/VCPwKfj/email.jpg) (https://ibb.co/VCPwKfj)

Hi salvo,

I compiled SimpleMail with SSL not updated version but the one in my icaros distro..

Ssl_v1 and ssl_v2 are wrap code of amissl to ssl and I tried older ssl and latest ssl from very last icaros distro and I couldn't connect to my Gmail.

I am working on new imap and I will update if I progress.

If you want to try my test compiles than please email at serk118@gmail.com.

I mean no point putting every test versions to Aros-exec atm
Title: Re: serk118uk's Native application and ports..
Post by: salvo on September 14, 2021, 04:40:06 PM
ok serk send you on email
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on September 14, 2021, 10:34:45 PM
You are on aros one x86 right??
Yes I tried with both Icaros 2.3 and AROS One, after creating or editing an account as soon as I press the Save or Use button the system freezes. With SimpleMail 0.37 and 043 no problem.

Quote
Please forward your email to serk118@gmail.com so I can email you my attempts of simplemail directly to you..
Mail sent to serk118@gmail.com

Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on September 15, 2021, 04:42:43 PM
@serk118uk
I received your E-Mail and your files on AROS One, the crash appears if I run SimpleMail from your directory, I attach a small video to show the crash that happens both with SimpleMail 4.6 and SimpleMail.debug, with SimpleMail.debug 3.7 no crash.

Your mui.library seems to be the one I used, if you need the Italian localization, you can find it in the OS3 and OS4 version.


Test Video  crashed system:
https://drive.google.com/file/d/1TT0Goc8JqBo9jfoNaAMzmoNkyc9nTI5z/view?usp=sharing
Title: Re: serk118uk's Native application and ports..
Post by: salvo on September 15, 2021, 07:17:20 PM
I replied to my test I made on your email
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on September 17, 2021, 07:26:12 PM
@serk118uk

EDIT:

I have solved the mystery of the block of your version of SimpleMail :)
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on September 19, 2021, 11:20:05 AM
Ok now SimpleMail 4.6 works fine, no crash, the problem was caused by the low RAM, increased the RAM on VMware Player the crash is disappeared.

Probably the new version requires more RAM than the previous versions.

In the occasion for SimpleMail I've created new Def_Icons in AROS One style (see screenshot), those used by default by SimpleMail were in the old Glow format :)
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on November 15, 2021, 04:24:53 PM
Hi ppl,

(AmIDE - Amiga Integrated Development Environment by Jens Langner)

I am trying to bring  another (origin amiga) Amiga Integrated Development Environment Tool, Amide (i will change name to ArosIDE when author gives me the permission)

Yet again i had to give Deadwood headache a bit to resolve errors.

(https://i.postimg.cc/s27kCX9T/amide.png)

Uses external editor (user choice).

Guess what I wish i knew about Murks Development Tool before i  started porting AmIDE..

I have to sort some of the functionality before i upload..
Title: Re: serk118uk's Native application and ports..
Post by: salvo on November 15, 2021, 05:03:51 PM
Great Serk :D
Title: Re: serk118uk's Native application and ports..
Post by: OlafS3 on November 15, 2021, 05:48:47 PM
looks good  :D
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on November 15, 2021, 05:59:40 PM
Thanks serk useful tool for developers !
Title: Re: serk118uk's Native application and ports..
Post by: miker1264 on November 15, 2021, 06:08:05 PM
Thanks serk useful tool for developers !

If it can compile complex programs like MultiView for x86 then I look forward to using it.
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on November 15, 2021, 06:45:45 PM
Thanks serk useful tool for developers !

If it can compile complex programs like MultiView for x86 then I look forward to using it.

Miker AmIDE is similar to MurksIDE, Murks more advance than AmIDE , I bet murks can handle what you want to do..
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on December 11, 2021, 12:54:44 PM
Hi ppl,

I have been busy with amiDE port and port is done ,i

>written GCC plugin (testing stage atm)
>changing how gui look , not finish yet..

I like to  make changes
-------------------------------------------
>email author get permission..to make changes.
>add editor with syntax highlighting..

here is how it looks with some changes to spot the errors easy..
(https://i.postimg.cc/Y0Ycx6sQ/amide.png)

Title: Re: serk118uk's Native application and ports..
Post by: Jeff1138 on December 11, 2021, 02:33:03 PM
Hi,

Great

I wrote too much to my DH1 partition and now will not allow me to add/ delete anything due to the disk is full error message,  can arsfsdoctor help with this or is it a lost cause?

Regards
Jeff
Title: Re: serk118uk's Native application and ports..
Post by: amigamia on December 11, 2021, 02:45:56 PM
Hi,

Great

I wrote too much to my DH1 partition and now will not allow me to add/ delete anything due to the disk is full error message,  can arsfsdoctor help with this or is it a lost cause?

Regards
Jeff

Are you using a virtual machine? If so, what about creating a new DHx drive and copy the content from DH1 to DHx?
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on December 11, 2021, 02:51:30 PM
Hi,

Great

I wrote too much to my DH1 partition and now will not allow me to add/ delete anything due to the disk is full error message,  can arsfsdoctor help with this or is it a lost cause?

Regards
Jeff

Hi,

Yes you can with 2 ways to fallow.

1.scan your disk than do deep scan and recover  files if files are listed in lost+found folder
2.select your drive and do clone drive to save your entire bad disk to file than mountthat  file as drive.

you will need another disk/hd to save your clone progress..


I  even have better version of arSFSDoctor , recovers anything but i just dont have much free time to finish that project yet..

read the readme about clone drive, if you need more hand/help do shout out here or create another tread

Title: Re: serk118uk's Native application and ports..
Post by: salvo on December 11, 2021, 03:57:24 PM
Thank you for aide Serk :)
Title: Re: serk118uk's Native application and ports..
Post by: salvo on December 13, 2021, 03:11:28 PM
Serk you can work on Raystorm if you don't have other projects :)
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on June 01, 2022, 07:51:30 PM
(https://i.postimg.cc/fLcztLLW/Murks-0-6-1.png)

Thanks to Deadw00d , we have the latest Murks, I will upload to archives when i sort out the tool icons/images.

Default Iconset is too bulky, It would be nice to redesign the iconset anyone??? (i tried but not to sharp)

I am also working on TwinsIDE class  not ready yet to integrade (https://lh3.googleusercontent.com/-hG1zBbWnuVI/Ypd9HFfR0DI/AAAAAAAARwU/E0Ko5bt3v8kc6Z-r7ho3F6gQFtbUE_13ACNcBGAsYHQ/s1600/1654095131164990-0.png)
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on June 01, 2022, 09:12:41 PM
serk, if my Murks icons of like them I can make them smaller, maybe suggest me the size
Title: Re: serk118uk's Native application and ports..
Post by: deadwood on June 01, 2022, 09:15:54 PM
@serk118uk

Glad you see you are continuing development :)
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on June 01, 2022, 09:56:29 PM
serk, if my Murks icons of like them I can make them smaller, maybe suggest me the size

I prefer 32x32 or 48x48, I can include your iconset too and let user decide which one to use.

Maybe few more iconsets would be killer..
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on June 01, 2022, 10:10:08 PM
@serk118uk

Glad you see you are continuing development :)

Thank you for the help...
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on June 01, 2022, 10:13:23 PM
My icons are 48x49, I can reduce them to 32x32 and maybe in the future create another theme always with the same size.
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on June 02, 2022, 01:20:24 AM
Actually the 34x34 Images seems a good Measure, created two sets one light blue and the other Ochre, what do you think !



Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on June 02, 2022, 02:40:03 AM
I attach the two archives with the images
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on June 02, 2022, 02:40:46 AM
Actually the 34x34 Images seems a good Measure, created two sets one light blue and the other Ochre, what do you think !

Amazing work, can you email me plz..thanks..(sorry just seen its attached) thank you again..
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on June 03, 2022, 12:35:38 AM
serk I created you a new icon set, these show better visibility of the tools, If you want you can change the color and create other set, I attach archive
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on June 03, 2022, 10:41:48 AM
If you have added new tools show me some example icons

For those who like scruffy colors here is the Black and Blue version

On the previous page I have attached the colo Brown pictures !
Title: Re: serk118uk's Native application and ports..
Post by: salvo on June 03, 2022, 01:10:25 PM
thank you for your effort serk :)
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on June 03, 2022, 02:44:46 PM
@AMIGASYSTEM

Thank you once again  all themes will be in , toolset_thames/ folder,  user can select which ever toolset theme he/she wants to use..(i actually like the black theme atm )
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on June 03, 2022, 04:40:36 PM
@AMIGASYSTEM
(https://i.postimg.cc/dVqWTqLF/murks-new-front-end.png)

More scaleable and slightly more neat, soon will have perfect IDE for AROS
Title: Re: serk118uk's Native application and ports..
Post by: deadwood on June 03, 2022, 05:56:37 PM
Looks really good! BTW, if you want to get added to source forge project to be able to push your changes to repository, give me your source forge user name please :)
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on June 03, 2022, 05:59:25 PM
For the Series "I am never happy with what I do" ;D

I send you the new image with logo "Star" and the Fix lella Image "X" which was ugly :)


If more new images are needed just ask

Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on June 03, 2022, 11:25:47 PM
I noticed that there is still a button to create "The last one in your screenshot", but I didn't understand what it can be used for and therefore what kind of icon to create !
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on June 04, 2022, 02:45:58 PM
I noticed that there is still a button to create "The last one in your screenshot", but I didn't understand what it can be used for and therefore what kind of icon to create !


Ignore the last button/image , thats basicly run button and one before compile so i like them 2 buttons clear as possible so i made the play button for run button..

(https://i.postimg.cc/Pqqh45mh/aa.png)

@AMIGASYSTEM you have giving me idea/and icons to work on so thank you once again , i will upload the archive to you once its tidy up..

whats holding me its TwinsIDE editor class integration , i see if i can reflect changes to texteditor.mcc  and use that if i can.
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on June 04, 2022, 03:03:56 PM
Looks really good! BTW, if you want to get added to source forge project to be able to push your changes to repository, give me your source forge user name please :)

I will create new source forge  account once i am finish with murks and push the changes,(only if OWB allows me to)
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on June 04, 2022, 03:29:07 PM
I'm glad I was helpful, for the Play I had created these, if you need them they are attached here
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on June 05, 2022, 01:33:22 PM
I'm glad I was helpful, for the Play I had created these, if you need them they are attached here

Thanks for the run/play buttons (Btw you are amazing , perfect button set)..

I knows you are busy updating your distro, if you do have free time, i like to add few more functions to Murks and i need button sets below....

Needed button sets
--     build button (current one not clear)
--    search/find button
--    goto line button

Thank you for your time and efford..
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on June 05, 2022, 06:51:06 PM
Alright as soon as possible I will prepare the icons, for build button and goto line button, if you have any ideas or images you can show me so I can create a similar one.
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on June 05, 2022, 08:35:56 PM
Done, see if these fit ?
Title: Re: serk118uk's Native application and ports..
Post by: serk118uk on June 06, 2022, 12:18:13 AM
Done, see if these fit ?

Thank you, looks amazing.

I was about to use
http://www.amiga-look.org/artwork/farosenza-icon-pack

Screenshot on right, enlarge and I see tools under aros for build.

Anyways you done amazing work...
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on June 06, 2022, 12:33:45 AM
I know Farosenza Icon-pack, I used it on my early versions of AROS One v1.0/1.1/1.2

If you missed it, the latest icons are attached below the screenshot !
Title: Re: serk118uk's Native application and ports..
Post by: AMIGASYSTEM on June 06, 2022, 11:57:57 AM
MurksRun didn't like it, recreated it !